BOPP Holographic Film
High-performance PET holographic coated film is a transparent PET film with built-in embossing layer. It supports direct embossing without extra coating. After aluminizing or dielectric coating, it is used for anti-counterfeit holographic packaging. It can also be laminated with coated paper or films to make packages for wine, cigarettes, medicine, daily chemicals and food.
Product Specifications
| Thickness | Width | Length |
| 15-25μm | 350～2000mm | 3000～8000m |
Product features
Product Features
-
Corona side marking: No corona treatment on both sides.
Heat-seal side marking: The embossed heat-seal side faces outward during winding.
- Wide applicability, especially for plain, grating and other high-end anti-counterfeit holographic packaging.
- Mass production on dedicated lines with standardized management and stable manufacturing processes.
- Clean film surface and stable embossing performance, ideal for continuous processing.
- Flat film surface, high brightness after embossing, slow corona attenuation and excellent post-processing performance.
Product Parameters
Product Parameters
PET High-performance Double-sided Holographic Coated Film, 15μm
Test Item Unit Test Result Thickness μm 15 Tensile Strength Machine Direction MPa 187.1 Transverse Direction MPa 201.9 Elongation at Break Machine Direction % 129.4 Transverse Direction % 87.1 Heat Shrinkage Machine Direction % 1.12 Transverse Direction % -0.1 Wetting Tension dyne/cm 58 Light Transmittance % 91.9 Haze % 2.2 PET High-performance Single-sided Holographic Coated Film, 25μm
Test Item Unit Test Result Thickness μm 25 Tensile Strength Machine Direction MPa 195.9 Transverse Direction MPa 238.6 Elongation at Break Machine Direction % 147.1 Transverse Direction % 97.1 Heat Shrinkage Machine Direction % 1.2 Transverse Direction % -0.1 Wetting Tension dyne/cm - Light Transmittance % 93.4 Haze % 2.24
Product Applications
① Emboss holographic patterns on the film, optionally apply aluminum coating or dielectric layer, then laminate with paperboard or film for customized packaging. ② Conduct embossing, aluminizing and coating first, then surface printing, followed by lamination with paperboard or film. Suitable for wine boxes, medicine boxes, cosmetic boxes and food packaging boxes.
Back to List
